Bear Archery · Compound bow
Bear Cruzer G4: spec analysis.
A Bear package bow listed from 14 to 30 inches and 10 to 70 pounds.
The price is a package with Trophy Ridge accessories, not a bare bow.
- Draw length
- 14–30 in
- Axle to axle
- 29 in
- Mass
- 3.2 lb
Maker price · ready-to-hunt package
Read November 4, 2026
No hands-on test completed. View the original manufacturer source.
What are the Bear Cruzer G4 specifications?
Bear lists the Cruzer G4 with a 14–30-inch draw range, 29-inch axle-to-axle length, 3.2-pound mass, 10–70-pound draw weights and 75% let-off. The page gives 6.25 inches of brace height in its specification table and 6.5 inches in its overview. It sells as a ready-to-hunt package for $479.99.
| Draw length | 14–30 in |
|---|---|
| Axle to axle | 29 in |
| Brace height | 6.25 in or 6.5 in (Bear’s page lists both) |
| Mass | 3.2 lb |
| Draw weights | 10–70 lb |
| Let-off | 75% |
| Package | Trophy Ridge ready-to-hunt accessories |
| Advertised speed | 315 (no unit or standard on the page) |
Is $479.99 for the bow or the package?
The package. Bear sells the Cruzer G4 as an RTH (ready-to-hunt) bow with Trophy Ridge accessories. Compare it with package prices, not with the bare-bow price of the Bear Adapt 2.
Why two brace heights?
The maker page says 6.25 inches in one place and 6.5 inches in another. We show both and do not pick one. A shop can measure the bow it sells you.
Does the Bear Cruzer G4 fit my draw length?
Only a fitting can confirm it. Bear Archery lists a 14–30 in draw-length range, so first check that your measured draw length falls inside it. Then ask which draw-weight option you can control with good form. No other current compound in our catalogue lists a range that covers this whole span.
How does the Bear Cruzer G4 compare on paper?
These are the 3 current compound bows in our catalogue closest to it in maker price. All values are maker specifications; they do not show which bow shoots better.
Swipe the table to see all 4 bows →
| Specification | Bear Cruzer G4 | Diamond Edge XT | Bear Adapt 2 | Elite Ember |
|---|---|---|---|---|
| Maker price | $479.99 | $449.00 | $529.99 | $579.99 |
| Price basis | Maker price · ready-to-hunt package | Maker price · “starting at” | Maker list price · bow only | Maker regular price |
| Draw length | 14–30 in | 19–31 in | 24–31 in | 15–29 or 16–30 in (Elite lists both) |
| Axle to axle | 29 in axle to axle | 31 in axle to axle | 31 in axle to axle | 31.25 in axle to axle |
| Draw weights | 10–70 lb | 20–70 lb | 45–60 or 55–70 lb options | 10–60 lb |
| Advertised speed | 315 fps (no IBO or ATA label) | 300 fps (no IBO or ATA label) | Up to 320 fps (no IBO or ATA label) | 310 fps (IBO) |
Open these bows in the comparison
What can the spec sheet not tell you?
We have not tested its draw cycle, valley, noise, vibration, balance and accuracy. Advertised speed stays a maker claim with the maker’s label. Handle a configured bow at a shop before you buy.
Source and analysis basis
Bear Archery Cruzer G4 RTH product page, read November 4, 2026. Manufacturer specifications and pricing, not independently measured performance. Editorial standards.