Hoyt Archery · Compound bow · 2026
Hoyt Carbon RX-10: spec analysis.
Hoyt’s 2026 carbon-riser hunting bow, the successor to the RX-9 line.
Hoyt also sells Ultra, Ultra LD and SD versions; the numbers here are the standard RX-10.
- Draw length
- 25–30 in
- Axle to axle
- 30.5 in
- Mass
- 4.1 lb
Maker MSRP · standard RX-10
Read November 4, 2026
No hands-on test completed. View the original manufacturer source.
What are the Hoyt Carbon RX-10 specifications?
For the standard Carbon RX-10, Hoyt lists a 25–30-inch draw range, 30.5-inch axle-to-axle length, 6.125-inch brace height, 4.1-pound mass and 40–80-pound draw weights on the HBX Gen 4 cam. Hoyt states 342 fps under its ATA label; that is a maker claim. MSRP is $2,149.00, the highest price in our catalogue.
| Draw length | 25–30 in |
|---|---|
| Axle to axle | 30.5 in |
| Brace height | 6.125 in |
| Mass | 4.1 lb |
| Draw weights | 40–80 lb |
| Cam | HBX Gen 4 |
| Advertised speed | 342 fps (ATA) |
Which RX-10 version do I need?
Hoyt lists four versions: RX-10, RX-10 Ultra, RX-10 Ultra LD (long draw) and RX-10 SD (short draw). The draw range on this page is the standard model’s. If your draw is outside 25–30 inches, ask about the LD or SD version rather than assuming this table applies.
What do you get for the price?
The listed price is for the bow. At $2,149.00 it costs about 2.5 times the aluminum-riser Hoyt Enduro ($849.00 MSRP). The spec sheet shows a carbon riser and a 0.55-pound lower mass than the Enduro; it does not show whether that difference matters to you. Handle both if a dealer has them.
Does the Hoyt Carbon RX-10 fit my draw length?
Only a fitting can confirm it. Hoyt Archery lists a 25–30 in draw-length range, so first check that your measured draw length falls inside it. Then ask which draw-weight option you can control with good form. Other current compounds in our catalogue whose listed range covers the same span: Hoyt Enduro, Bear Adapt 2, Mathews Lift X, Diamond Edge XT, Bear Cruzer G4, PSE Stinger ATK, Hoyt Alpha AX-3 29.
How does the Hoyt Carbon RX-10 compare on paper?
These are the 3 current compound bows in our catalogue closest to it in maker price. All values are maker specifications; they do not show which bow shoots better.
Swipe the table to see all 4 bows →
| Specification | Hoyt Carbon RX-10 | Hoyt Alpha AX-3 29 | Mathews Lift X | Hoyt Enduro |
|---|---|---|---|---|
| Maker price | $2,149.00 | $1,499.00 | $1,359.00 | $849.00 |
| Price basis | Maker MSRP · standard RX-10 | Maker MSRP · 29 in model | Maker MSRP · 29.5 in: $1,359.00 · 33 in: $1,496.00 | Maker MSRP · bow only |
| Draw length | 25–30 in | 25–30 in | 24.5–30 in (29.5) · 26–31.5 in (33) | 24–30 in |
| Axle to axle | 30.5 in axle to axle | 29.5 in axle to axle | 29.5 or 33 in axle to axle | 30 in axle to axle |
| Draw weights | 40–80 lb | 40–80 lb | 55–80 lb | 35–70 lb listed range |
| Advertised speed | 342 fps (ATA) | 340 fps (ATA) | Up to 348 fps (IBO, 29.5 model) | 328 fps (ATA) |
Open these bows in the comparison
What can the spec sheet not tell you?
We have not tested its draw cycle, valley, noise, vibration, balance and accuracy. Advertised speed stays a maker claim with the maker’s label. Handle a configured bow at a shop before you buy.
Source and analysis basis
Hoyt Carbon RX-10 product page, read November 4, 2026. Manufacturer specifications and pricing, not independently measured performance. Editorial standards.