ARCHERYCRITIC.
2025Hoyt Torrex

Hoyt Archery no longer publishes a product page or photo for this model. The numbers on this page come from its 2025 specification sheet.

The 2025 sheet

Hoyt Torrex manufacturer specifications, read October 29, 2026
Model year2025 (archived)
Draw length26–30 in
Axle to axle30.75 in
Brace height7 in
Mass3.8 lb
Limb options30–40, 40–50, 50–60, 55–65 or 60–70 lb
Advertised speed327 fps (ATA)

Archived 2025 Hoyt Archery · Compound bow

Hoyt Torrex: the 2025 archive.

Historical reference: Hoyt’s 2025 Torrex, from the maker’s spec sheet.

Archived model. Hoyt no longer lists the Torrex on its current hunting-bow page (hoyt.com, checked November 4, 2026), and its old product address returns “not found”. This page keeps the 2025 specification sheet for people who own or are offered a used Torrex.

Being offered a used Torrex? Check the limbs and draw module on that exact bow.

Price not listed

No current maker price (model no longer listed)
Read October 29, 2026

No hands-on test completed. View the original manufacturer source.

Review basis: Hoyt’s 2025 specification sheet, read October 29, 2026. We have not shot this bow. This is a specification analysis, with no performance score.

What are the Hoyt Torrex specifications?

For the Torrex, Hoyt’s 2025 sheet lists a 26–30-inch draw range, 30.75-inch axle-to-axle length, 7-inch brace height and 3.8-pound bow weight, with limb options from 30–40 to 60–70 pounds. The sheet lists 327 fps under its ATA speed heading; that is a maker claim.

Which Torrex configuration are you being offered?

The 2025 sheet lists five limb-weight ranges. Confirm the limbs and draw module on the bow in front of you. The Torrex XT is a different configuration; do not use its numbers for a Torrex.

What should I check on a used Torrex?

A used bow’s condition, strings and cams matter more than the spec sheet. Have a shop inspect it before you buy.

Does the Hoyt Torrex fit my draw length?

Only a fitting can confirm it. Hoyt Archery lists a 26–30 in draw-length range, so first check that your measured draw length falls inside it. Then ask which draw-weight option you can control with good form. Other current compounds in our catalogue whose listed range covers the same span: Hoyt Enduro, Bear Adapt 2, Mathews Lift X, Hoyt Carbon RX-10, Diamond Edge XT, Bear Cruzer G4, PSE Stinger ATK, Hoyt Alpha AX-3 29.

How does the Hoyt Torrex compare on paper?

These are the current Hoyt compounds in our catalogue, from Hoyt’s own pages read November 4, 2026. All values are maker specifications; they do not show which bow shoots better.

Swipe the table to see all 4 bows →

SpecificationHoyt TorrexHoyt EnduroHoyt Carbon RX-10Hoyt Alpha AX-3 29
Maker priceNot listed$849.00$2,149.00$1,499.00
Price basisNo current maker price (model no longer listed)Maker MSRP · bow onlyMaker MSRP · standard RX-10Maker MSRP · 29 in model
Draw length26–30 in24–30 in25–30 in25–30 in
Axle to axle30.75 in30 in30.5 in29.5 in
Draw weights30–40 to 60–70 lb limb options35–70 lb listed range40–80 lb40–80 lb
Advertised speed327 fps (ATA)328 fps (ATA)342 fps (ATA)340 fps (ATA)

Open these bows in the comparison

What can the spec sheet not tell you?

We have not tested its draw cycle, valley, noise, vibration, balance and accuracy. Advertised speed stays a maker claim with the maker’s label. Handle a configured bow at a shop before you buy.

Source and analysis basis

Hoyt 2025 Hunting Compound Specs, Hoyt’s 2025 specification sheet, read October 29, 2026; Hoyt’s current hunting lineup checked November 4, 2026. Manufacturer specifications and pricing, not independently measured performance. Editorial standards.